Тут не исправить уже ничего, Господь, жги! Войти !bnw Сегодня Клубы
УНЯНЯ. У нас есть немножечко инфы об этом пользователе. Мы знаем, что он понаписал, порекомендовал и даже и то и другое сразу. А ещё у нас есть RSS.
Теги: Клубы:

http://deaddrop.ftp.sh/JnhZWQ0o1N7W.jpg

Допилил первую версию автономной светомузыки для торчков, наконец-то имплементировав все хотелки которые хотел. До этого приходилось тусить на вечеринках с ноутом и принудительно слушать очень плохую музыку, а теперь я могу поставить все это дело в клубе и спокойно свалить в тихое спокойное место.
Основные компоненты:
- Orange Pi Zero H2 Quad Core 512MB - основной вычислитель. Предельно дешево и сердито. Софт - armbian, qlcplus.
- CM6206 USB Sound Card - выбрал за наличие оптических входов-выходов и кучи аналоговых каналов. Оптика нужна, потому что рукожопые уже спалили межфазным нашу понтовую звуковуху и мать компутера.
- Роутер D-Link DIR-300 Model A - достался нахаляву в незапамятные времена хер знает откуда. Работает на openwrt, в основном в качестве вайфай-точки к которой подключаются конечные ноды на ESP8266.
- 4-х портовый USB-хаб - с внешним питанием, сейчас используется только для звуковухи, но также можно навтыкать прочей ерунды при необходимости и не думая о том что оранж не потянет по питанию.
- DC-DC step-down - питает всю хурму (оранжпи, роутер и хаб) пятью вольтами.

http://deaddrop.ftp.sh/jFbJeIC6oD6f.jpg - внутренности.
В процессе сборки у оранжпи наебнулись с выпуском волшебного дыма по очереди два преобразователя питания, пришлось выкинуть их нахрен, принять что power sequencing не нужен и заменить их на внешний модулек
http://deaddrop.ftp.sh/oVG7dI71PkMd.jpg - последствия ремонта.

Конфигурация уже предварительно обкатана в боевых условиях неделю назад, завтра будет работать на маленькой треш-UG-говнопати (на которой я точно не хочу находиться)

#YJY8LE (2+7) / @lexszero / 2567 дней назад

Будующее по мнению futurology experts of kaspersky labs: http://dump.lexs.blasux.ru/files/pydokyj/2017-03-01-144606_1366x768_scrot.png - ебля с роботами и лесорубские бороды.
https://2050.earth/

#RI8MUC (12+1) / @lexszero / 2584 дня назад

https://polyfractal.com/post/rustl8710/
раст прикрученный изолентой к freertos на аналоге esp8266 с cortex-m3 вместо цугундерного xtensa.

#10D3EK (7+3) / @lexszero / 2598 дней назад

Препейд симка стоит 4.90е в ларьке без смс и регистрации. На счету 7е, если докинуть еще 10 - можно купить месяц интернетов за 17е (четырегэ, полный анлим). Если каждый месяц покупать новую симку, а старую выкидывать нахуй, выходит на 2е дешевле.

#A3RXXZ (7+1) / @lexszero / 2598 дней назад

Сегодня пришла бумажка о том что мне выдали личный идентификационный номер. Там было написано что я живу по текущему адресу с 01.01.2017 (это действительно так), а сам номер, имеющий форму <дата_рождения>-<рэндом_циферки>, вместо циферок имел 255. Первая мысль спросонья "и тут быдлокодеры обосрались, дата левая и вместо номера 0xFF".

#8CUG3P (1+1) / @lexszero / 2606 дней назад

СЯУ что ядре есть поддержка специальных файликов в sysfs с информацией о том, бежит или идет юзер.

What: /sys/.../iio:deviceX/in_activity_still_input
What: /sys/.../iio:deviceX/in_activity_walking_input
What: /sys/.../iio:deviceX/in_activity_jogging_input
What: /sys/.../iio:deviceX/in_activity_running_input
KernelVersion: 3.19
Contact: linux-iio@vger.kernel.org
Description:
This attribute is used to read the confidence for an activity
expressed in units as percentage.

#X0H3MB (7) / @lexszero / 2610 дней назад

https://gist.github.com/lexszero/116fc5b6ee41ff9a8fc64cfb50f33673
костыль, который проверяет, есть ли у сабжа не-generic экстрактор для урла.

#S6O0CL (14) / @lexszero / 2611 дней назад

tfw отправил резюме на вакансию Embedded Linux Engineer в которой есть линк на страничку в трелло с корпоративной культурой и перечислением всех используемых хипстотехнологий.

#QQZFPE (3+2) / @lexszero / 2612 дней назад

liquidsoap охуенный.

#ZA3L8W (2) / @lexszero / 2616 дней назад

1986: Poetica Vaginal
Joe Davis is an artist and a research affiliate at Massachusetts Institute of Technology. In the mid-1980s, he became concerned that no image of humans had been sent into space representing the details of human genitals or reproduction.
So he led a project to transmit the sounds of vaginal contractions towards neighbouring star systems. To do so, he recorded the vaginal contractions of ballet dancers.
The messages were to be sent from MIT’s Millstone Hill Radar to Epsilon Eridani, Tau Ceti and two other stars. However, only a few minutes of footage was transmitted before the US air force, which had jurisdiction over the facility, shut the project down.
Nevertheless, the vaginal sounds that were sent will have reached Epsilon Eridani in 1996 and Tau Ceti in 1998. It is unclear what sort of reply we should expect.

I can imagine superintelligent alien race with mad skills in solving inverse problems spending centuries solving the signal. When they eventually have working models of vaginas and ballerinas, they can listen The Nutcracker. Probably they send us message back saying something like: "OK. that was weird!"

#6RPAHZ (1) / @lexszero / 2621 день назад

В сотне метров от моего дома проходит железная дорога, по которой регулярно катаются поезда, их видно из окна. Самый большой дискомфорт который я от этого испытываю - изредка при прохождении особо тяжелого товарняка слегка трясется дисплей ноута. Вообще, поезда тут невообразимо тихие, я даже не подозревал что так бывает: в трех метрах от идущего пассажирского можно спокойно разговаривать не сильно повышая голос.
А сейчас попалось видео, которое наглядно демонстрирует, почему для жителей рашки поезд неразрывно ассоциируется с хтоническим грохочущим чудовищем: https://www.youtube.com/watch?v=IKOjtHjvMlU

#UK1AX4 (11+3) / @lexszero / 2623 дня назад

Ура, дали резиденс пермит на год // прошло без недели полгода с момента подачи.

#5STQMZ (7+5) / @lexszero / 2634 дня назад

Во время питья чая с печеньками от нижней шестерки (которая несколько лет назад была запломбирована непомнючем на стеклопластиковых штифтах) откололась стенка размером в треть зуба (родная). Не болит (нервы выпилены), шатается и анноит, но совсем не отваливается, стараюсь не ковырять и не шатать.. Приклеить ее на место цианакрилатом (интернеты грят что бывают сорта одобренные для медицинского применения) - это хорошая идея или мне ебать страховую и пиздовать в зубодерню?

#PQM4BW (27+1) / @lexszero / 2641 день назад

Despite the high level of automation in this factory, many of the workers I saw were performing one operation. They fed the pullers for a different kind of zipper into a device connected to another vibrapot containing sliders, while the device put the sliders and pullers together. Of course, I asked, “Why do some zippers have fully automated assembly processes, whereas others are semiautomatic?”
The answer, it turns out, is very subtle, and it boils down to shape.
http://dump.lexs.blasux.ru/files/wedahem/2016-12-29-092320_892x647_scrot.png
....
That tiny tab allowed gravity to cause all the pullers to hang in the same direction as they fell into a rail toward the left. The semiautomated zipper design doesn’t have this tab; as a result, the design is too symmetric for a vibrapot to align the puller. I asked the factory owner if adding the tiny tab would save this labor, and he said absolutely. At this point, it seemed blindingly obvious to me that all zippers should have this tiny tab, but the zipper’s designer wouldn’t have it. Even though such a tab is very small, consumers can feel the subtle bumps, and some perceive it as a defect in the design. As a result, the designer insisted upon a perfectly smooth tab, which accordingly had no feature to easily and reliably allow for automatic orientation.
I’d like to imagine that most people, after watching a person join pullers to sliders for a couple of minutes, would be quite content to suffer a tiny bump on the tip of their zipper to save another human the fate of manually aligning pullers into sliders for eight hours a day. Alternatively, I suppose an engineer could spend countless hours trying to design a more complex method for aligning the pullers and sliders, but there are two problems with that:
- The zipper’s customer probably wouldn’t pay for that effort.
- It’s probably net cheaper to pay unskilled labor to manually perform the sorting.
This zipper factory owner had already automated everything else in the facility, so I figure they’ve thought long and hard about this problem, too. My guess is that robots are expensive to build and maintain; people are self­replicating and largely self­maintaining. Remember that third input to the factory—rice? Any robot’s spare parts have to be cheaper than rice for the robot to earn a place on this factory’s floor. In reality, however, it’s too much effort to explain this concept to end customers; and in fact, quite the opposite happens in the market. Putting the smooth zippers together involves extra labor, so the zippers cost more; therefore, they tend to end up in high­end products. This further enforces the notion that really smooth zippers with no tiny tab on them must be the result of quality control and attention to detail.
My world is full of small frustrations like this.

#WT2XOQ (6+2) / @lexszero / 2646 дней назад
--
ipv6 ready BnW для ведрофона BnW на Реформале Викивач Котятки

Цоперайт © 2010-2016 @stiletto.