https://qualiacomputing.com/2015/06/09/state-space-of-drug-effects-results/
Сегодня пришла бумажка о том что мне выдали личный идентификационный номер. Там было написано что я живу по текущему адресу с 01.01.2017 (это действительно так), а сам номер, имеющий форму <дата_рождения>-<рэндом_циферки>, вместо циферок имел 255. Первая мысль спросонья "и тут быдлокодеры обосрались, дата левая и вместо номера 0xFF".
СЯУ что ядре есть поддержка специальных файликов в sysfs с информацией о том, бежит или идет юзер.
What: /sys/.../iio:deviceX/in_activity_still_input
What: /sys/.../iio:deviceX/in_activity_walking_input
What: /sys/.../iio:deviceX/in_activity_jogging_input
What: /sys/.../iio:deviceX/in_activity_running_input
KernelVersion: 3.19
Contact: linux-iio@vger.kernel.org
Description:
This attribute is used to read the confidence for an activity
expressed in units as percentage.
https://gist.github.com/lexszero/116fc5b6ee41ff9a8fc64cfb50f33673
костыль, который проверяет, есть ли у сабжа не-generic экстрактор для урла.
1986: Poetica Vaginal
Joe Davis is an artist and a research affiliate at Massachusetts Institute of Technology. In the mid-1980s, he became concerned that no image of humans had been sent into space representing the details of human genitals or reproduction.
So he led a project to transmit the sounds of vaginal contractions towards neighbouring star systems. To do so, he recorded the vaginal contractions of ballet dancers.
The messages were to be sent from MIT’s Millstone Hill Radar to Epsilon Eridani, Tau Ceti and two other stars. However, only a few minutes of footage was transmitted before the US air force, which had jurisdiction over the facility, shut the project down.
Nevertheless, the vaginal sounds that were sent will have reached Epsilon Eridani in 1996 and Tau Ceti in 1998. It is unclear what sort of reply we should expect.
I can imagine superintelligent alien race with mad skills in solving inverse problems spending centuries solving the signal. When they eventually have working models of vaginas and ballerinas, they can listen The Nutcracker. Probably they send us message back saying something like: "OK. that was weird!"
В сотне метров от моего дома проходит железная дорога, по которой регулярно катаются поезда, их видно из окна. Самый большой дискомфорт который я от этого испытываю - изредка при прохождении особо тяжелого товарняка слегка трясется дисплей ноута. Вообще, поезда тут невообразимо тихие, я даже не подозревал что так бывает: в трех метрах от идущего пассажирского можно спокойно разговаривать не сильно повышая голос.
А сейчас попалось видео, которое наглядно демонстрирует, почему для жителей рашки поезд неразрывно ассоциируется с хтоническим грохочущим чудовищем: https://www.youtube.com/watch?v=IKOjtHjvMlU
Во время питья чая с печеньками от нижней шестерки (которая несколько лет назад была запломбирована непомнючем на стеклопластиковых штифтах) откололась стенка размером в треть зуба (родная). Не болит (нервы выпилены), шатается и анноит, но совсем не отваливается, стараюсь не ковырять и не шатать.. Приклеить ее на место цианакрилатом (интернеты грят что бывают сорта одобренные для медицинского применения) - это хорошая идея или мне ебать страховую и пиздовать в зубодерню?
Despite the high level of automation in this factory, many of the workers I saw were performing one operation. They fed the pullers for a different kind of zipper into a device connected to another vibrapot containing sliders, while the device put the sliders and pullers together. Of course, I asked, “Why do some zippers have fully automated assembly processes, whereas others are semiautomatic?”
The answer, it turns out, is very subtle, and it boils down to shape.
http://dump.lexs.blasux.ru/files/wedahem/2016-12-29-092320_892x647_scrot.png
....
That tiny tab allowed gravity to cause all the pullers to hang in the same direction as they fell into a rail toward the left. The semiautomated zipper design doesn’t have this tab; as a result, the design is too symmetric for a vibrapot to align the puller. I asked the factory owner if adding the tiny tab would save this labor, and he said absolutely. At this point, it seemed blindingly obvious to me that all zippers should have this tiny tab, but the zipper’s designer wouldn’t have it. Even though such a tab is very small, consumers can feel the subtle bumps, and some perceive it as a defect in the design. As a result, the designer insisted upon a perfectly smooth tab, which accordingly had no feature to easily and reliably allow for automatic orientation.
I’d like to imagine that most people, after watching a person join pullers to sliders for a couple of minutes, would be quite content to suffer a tiny bump on the tip of their zipper to save another human the fate of manually aligning pullers into sliders for eight hours a day. Alternatively, I suppose an engineer could spend countless hours trying to design a more complex method for aligning the pullers and sliders, but there are two problems with that:
- The zipper’s customer probably wouldn’t pay for that effort.
- It’s probably net cheaper to pay unskilled labor to manually perform the sorting.
This zipper factory owner had already automated everything else in the facility, so I figure they’ve thought long and hard about this problem, too. My guess is that robots are expensive to build and maintain; people are selfreplicating and largely selfmaintaining. Remember that third input to the factory—rice? Any robot’s spare parts have to be cheaper than rice for the robot to earn a place on this factory’s floor. In reality, however, it’s too much effort to explain this concept to end customers; and in fact, quite the opposite happens in the market. Putting the smooth zippers together involves extra labor, so the zippers cost more; therefore, they tend to end up in highend products. This further enforces the notion that really smooth zippers with no tiny tab on them must be the result of quality control and attention to detail.
My world is full of small frustrations like this.
http://deaddrop.ftp.sh/29gHX46ePWOX.jpg
Типикал ужин нищеброда. Себестоимость порядка €1, время приготовления порядка 20 минут (хуйнуть курицу в микроволновку, хуйнуть макароны в кастрюлю, хуйнуть кофе в кофеварку, аутировать до готовности).
The Hardware Hacker: Adventures in Making and Breaking Hardware by by Andrew 'bunnie' Huang
http://dump.lexs.blasux.ru/files/bepalab/The.Hardware.Hacker.Adventures.in.Making.and.Breaking.Hardware.Early.Access.pdf
Книжка про то как автор dive into Shenzhen ecosystem. Много лулзов и картинок.
http://dump.lexs.blasux.ru/files/tozinum/2016-12-21-233251_644x525_scrot.png